Author: Newrockuser
Subject: X570 Taichi 3 NVMe drives - Detection problem.
Posted: 27 Oct 2019 at 8:58pm
- Booted with OS Drive only installed - worked
- Booted adding the drive that did not crash before in the second NVMe slot where the drive that crashed was in - worked
- Booted with the non crashing drive in NVMe slot 3 - worked
Step 2
Same procedure with the drive that crashed before - worked
Step 3
- Booted with all 3 drives occupying a slot, only change is that the drive that crashed before is now in the NVMe slot the no crashing drive was in - Works.
System worked fine for a few hours - Then same problems started occurring. Any SATA monitoring software takes 8 or more minutes to read the SATA data. This software includes HWinfo, Hwmonitor, Kingston SSD manager and Hard disk sentinel.
-reinstalled AMD chipset drivers
-Installed latest windows updates
-Same problem.
Power supply OFF / ON fixes the issue but only instantly after a reboot, 30 seconds later any poling of SATA devices hangs again for about 6 to 8 minutes. I thought temperature might have been the issue but after a complete cold start the same thing happens.
I'm starting to run out of ideas here part from flashing the mobo bios since I am still on 2.10 and there is a 2.11 and maybe flashing the firmware on the kingston drives which, I'd like to avoid doing if I can.
Subject: X570 Taichi 3 NVMe drives - Detection problem.
Posted: 27 Oct 2019 at 8:58pm
- Booted with OS Drive only installed - worked
- Booted adding the drive that did not crash before in the second NVMe slot where the drive that crashed was in - worked
- Booted with the non crashing drive in NVMe slot 3 - worked
Step 2
Same procedure with the drive that crashed before - worked
Step 3
- Booted with all 3 drives occupying a slot, only change is that the drive that crashed before is now in the NVMe slot the no crashing drive was in - Works.
System worked fine for a few hours - Then same problems started occurring. Any SATA monitoring software takes 8 or more minutes to read the SATA data. This software includes HWinfo, Hwmonitor, Kingston SSD manager and Hard disk sentinel.
-reinstalled AMD chipset drivers
-Installed latest windows updates
-Same problem.
Power supply OFF / ON fixes the issue but only instantly after a reboot, 30 seconds later any poling of SATA devices hangs again for about 6 to 8 minutes. I thought temperature might have been the issue but after a complete cold start the same thing happens.
I'm starting to run out of ideas here part from flashing the mobo bios since I am still on 2.10 and there is a 2.11 and maybe flashing the firmware on the kingston drives which, I'd like to avoid doing if I can.