Quantcast
Channel: ASRock Forums
Viewing all 13906 articles
Browse latest View live
↧

AMD Motherboards : Latency Is Sky High With Ram Settings

August 28, 2019, 5:35 am
$
0
0
Author: gizmic
Subject: Latency Is Sky High With Ram Settings
Posted: 28 Aug 2019 at 12:35pm

should be a mem error problem use a proper memtest if there are errors that should be causing the latency

but then again you didnt state your system specs not what latency numbers youre gettingin your test. it could be a ryzen 3000 with an unequal fclk
↧
Search

AMD Motherboards : Latency Is Sky High With Ram Settings

August 28, 2019, 6:38 am
$
0
0
Author: hewjazz321
Subject: Latency Is Sky High With Ram Settings
Posted: 28 Aug 2019 at 1:38pm

Thanks for the reply.

"it could be a ryzen 3000 with an unequal fclk"

I have no idea what this means. I am currently running a 3800x at default clock speeds. Someone else suggested I tinker with the chipset/board voltages. As for memory testers, I heard those things are not very reliable/accurate. I was thinking of trying Prime95. I have no blue screens/crashes/freezes or audio stutters with the ram at 3600. Everything runs fine.

The latency issue has me wondering if games will perform worse(more stutters,frame drops) If latency has no effect on this, then I was thinking of just leaving it at 3600 despite the spikes latencymon tells me Im getting.
↧
↧

AMD Motherboards : X570M Pro4 1800 FCLK no boot

August 28, 2019, 7:29 am
$
0
0
Author: Swissola
Subject: X570M Pro4 1800 FCLK no boot
Posted: 28 Aug 2019 at 2:29pm


I don't think it's my timings that are a problem. I want to get a stable boot at Mem 3600: FCLK 1800 MHz, which I should be able to get with the default XMP profile and some Voltage mods alone.

I'm linking my OC.net post, so I'm not double posting on two forums all the time.

https://www.overclock.net/forum/13-amd-general/1732214-support-3900x-infinity-fabric-1800mhz-oc-issues.html    - Sorry for the non linky text

Personally, at the moment, it feels like AsRock's default Voltages on my X570 board are way too high and have been set up there to give the greatest range of stability to people. Unfortunately, the fact they are so high doesn't give you any overclocking headroom at all.
↧

AMD Motherboards : Latency Is Sky High With Ram Settings

August 28, 2019, 7:38 am
$
0
0
Author: Xaltar
Subject: Latency Is Sky High With Ram Settings
Posted: 28 Aug 2019 at 2:38pm

The infinity fabric (the architecture that connects the 2 clusters of cores or
"CCXs") typically runs at the same frequency as the RAM, with Ryzen 3000
however it is now possible to run the IF (fclk) at a lower multiplier which
enables higher RAM frequencies at the cost of latency. The difference should be
negligible but some RAM combinations may not play nice with it. That said, most
games prefer frequency when it comes to RAM so I would just give it a try and
see how it plays. You can use something like MSI afterburner to check your
0.01% lows in both configs and see which gives you the better experience, 3600
or 3200.

As for audio, "live audio" refers to audio recording. You want as low latency
as possible when recording tracks and keeping them time aligned, playback is
not an issue however. It would effect streaming audio too but no one will care
if your speech is 0.01s off time to when you said it

If you will not be doing any multi track recording (making music for example)
then you don't need to worry about it.
↧

AMD Motherboards : X470 Taichi Ultimate code 7A

August 28, 2019, 7:45 am
$
0
0
Author: LocutusH
Subject: X470 Taichi Ultimate code 7A
Posted: 28 Aug 2019 at 2:45pm

Hi

Sometimes my MB wont soft reboot, it just get stuck with 7A, and spinning everything on max RPM.
A cold reset always works, boots normally then.

BIOS is all default latest.
What does this code mean? Why is there no description for it in the manual?

Thanks
↧
↧

AMD Motherboards : Upgrade to Ryzen 3600 on Fatal1ty AB350 gone wrong

August 28, 2019, 12:37 pm
$
0
0
Author: dbHRGdb
Subject: Upgrade to Ryzen 3600 on Fatal1ty AB350 gone wrong
Posted: 28 Aug 2019 at 7:37pm

hi There all,

I'd like to report, if still relative to anyone, that I did get my new R5-3600x running nice and normal using bios 5.81 on my Asrock b350 Fata1ity itx/ac FINALLY after days of tinkering with Corsair and Ballistics kits. To no avail even though with 1st gen Ryzen 1600, 1700 and 2400G had no probs with any reasonable setting or over clocks. Then I got a 16G kit of G-Skills 3200C16D-16GSXKB-16-18-18-38 from a friend in exchange for my Ballisticts kit. Soon after I managed to get into the bios after days of tinkering between my R5-1600 and bios' 4.70, 5.30, 5.70, and 6.0 which none of let me enter the bios with my usual AMD fore mentioned 3000 Corsair and 3200 Ballistics. Then I tried the G-Skills and got into bios 5.70 more often during boot cycles which I had let run over and over till it stopped cycling w/ just fans were full throttle and try again changing bios setting until i got less and less cycles between successful bios screens. what I realized is, Gen 1 boards or Gen 3 Ryzen 5 or the combo needs 1.4v on memory, memory set to 3000mhz because max Infinity Fabric on Gen 1 boards is 1500 max and it defaulted here setting different mem and voltage though all my attempts at successful boots. Also I cant restart the board, must be fully shut down to enable a stable boot that is and has been stable through all my test. Sometimes, i still get a boot cycle but only 1-3 times max and retain all setting as default in bios 5.81 (the ONLY bios that works for me WITH THESE G-SKILLS) Also, it improved further when after enabling XMP and setting mem down to 3000 with 1.4v, I then tightened timings from the stock 16-18-18-38 down to 14-16-16-36 and now my system is pretty consistent in all my benches and games, peppier and higher scores. eg. Cinebench before tightening was 1075 score :( to 1635 :) So, I hope this is helpful for someone out there. My games no longer experience the stuttering they once were with my R5-1600 being bottle necked. Now a Happy Camper here and new life out of my 1080ti and work bench!
↧

AMD Motherboards : BIOS Updates, Urgent note, Please read.

August 28, 2019, 12:42 pm
$
0
0
Author: dbHRGdb
Subject: BIOS Updates, Urgent note, Please read.
Posted: 28 Aug 2019 at 7:42pm

Hi There all,
-posted this in an older forum page, but i hope it helps-
I'd like to report, if still relative to anyone, that I did get my new R5-3600x running nice and normal using bios 5.81 on my Asrock b350 Fata1ity itx/ac FINALLY after days of tinkering with Corsair and Ballistics kits and posted bioses up to 6.0. To no avail even though with 1st gen Ryzen 1600, 1700 and 2400G had no probs with any reasonable setting or over clocks. Then I got a 16G kit of G-Skills 3200C16D-16GSXKB-16-18-18-38 from a friend in exchange for my Ballisticts kit. Soon after I managed to get into the bios after days of tinkering between my R5-1600 and bios' 4.70, 5.30, 5.70, and 6.0 which none of let me enter the bios with my usual AMD fore mentioned 3000 Corsair and 3200 Ballistics. Then I tried the G-Skills and got into bios 5.70 more often during boot cycles which I had let run over and over till it stopped cycling w/ just fans were full throttle and try again changing bios setting until i got less and less cycles between successful bios screens. what I realized is, Gen 1 boards or Gen 3 Ryzen 5 or the combo needs 1.4v on memory, memory set to 3000mhz because max Infinity Fabric on Gen 1 boards is 1500 max and it defaulted here setting different mem and voltage though all my attempts at successful boots. Also I cant restart the board, must be fully shut down to enable a stable boot that is and has been stable through all my test. Sometimes, i still get a boot cycle but only 1-3 times max and retain all setting as default in bios 5.81 (the ONLY bios that works for me WITH THESE G-SKILLS) Also, it improved further when after enabling XMP and setting mem down to 3000 with 1.4v, I then tightened timings from the stock 16-18-18-38 down to 14-16-16-34 and now my system is pretty consistent in all my benches and games, peppier and higher scores. eg. Cinebench before tightening was 1075 score :( to 1635 :) So, I hope this is helpful for someone out there. My games no longer experience the stuttering they once were with my R5-1600 being bottle necked. Now a Happy Camper here and new life out of my 1080ti and work bench!
↧

AMD Motherboards : Asrock x570m pro4 - 4 ram sticks problem

August 28, 2019, 3:51 pm
$
0
0
Author: Benlehot
Subject: Asrock x570m pro4 - 4 ram sticks problem
Posted: 28 Aug 2019 at 10:51pm

Hi guys,

I bought this board in the last few days to go with my 3900x.

I want 64gb for ram. I bought two kits of F4-3200C14D-32GVK

The problem is that I'm not able to set the ram at the actual speed with XMP. 3200CL14.

If I do this setting, all I have is a black screen and I need to reset the cmos using the jumper.

I can manually set the ram to 3600CL16 but it's not stable, I'm getting a lot of error in memtestx86.

The only way that I find to be able to boot without any errors was to set the ram to 2933CL14.

Is there a problem with the board? Is my ram faulty? What should I do?

Regards,
Ben
↧
Search

AMD Motherboards : X570 Steel Legend: PolyChrome Sync Issue

August 28, 2019, 4:32 pm
$
0
0
Author: rtazaki
Subject: X570 Steel Legend: PolyChrome Sync Issue
Posted: 28 Aug 2019 at 11:32pm

same.

I have found at least 2 problems.

1. Sync doesn't work
http://forum.asrock.com/forum_posts.asp?TID=12234&KW=&PID=67119&title=rgb-issues-polychrome-sync#67119
2. Firmware may not be updated
http://forum.asrock.com/forum_posts.asp?TID=11684&KW=&PID=66045&title=polychrome-sync-not-working#66045

-----
I regret having bought this product.

There are many problems with RGB Sync,
Do ASRock ignore reports from many users?

Please more spend time solving this problems.
Otherwise, the real cause will be hidden with
cargo cults accumulated by the user in forums
↧
↧

AMD Motherboards : X570 Taichi boot loop, showing A8 BIOS code

August 28, 2019, 4:40 pm
$
0
0
Author: triff
Subject: X570 Taichi boot loop, showing A8 BIOS code
Posted: 28 Aug 2019 at 11:40pm

Hi,

My PC just started displaying code A8 which the manual states is:

0xA8 DXE_SETUP_VERIFYING_PASSWORD

I haven't been able to find much other information about this other than it might be related to the NVMe. I've since removed the M2 SSD and still get the code, I've also reset the CMOS via the back button numerous times but it's still displaying A8. I've currently unplugged it completely and removed the CMOS battery to see if that makes any difference.

Anybody have any idea exactly what this code is referring to and how I can resolve the issue?

Thanks,
triff
↧

AMD Motherboards : X570 Steel Legend: PolyChrome Sync Issue

August 28, 2019, 4:47 pm
$
0
0
Author: gizmic
Subject: X570 Steel Legend: PolyChrome Sync Issue
Posted: 28 Aug 2019 at 11:47pm

read this and flash your rgb
↧

AMD Motherboards : Asrock x570m pro4 - 4 ram sticks problem

August 28, 2019, 4:47 pm
$
0
0
Author: rtazaki
Subject: Asrock x570m pro4 - 4 ram sticks problem
Posted: 28 Aug 2019 at 11:47pm

Hello,

Please look at below url.
https://www.asrock.com/MB/AMD/X570M%20Pro4/#Specification

Basically, if you insert 4 cards, clock is drop.
Please don't worry. nothing is broken.
↧

AMD Motherboards : X570 Steel Legend: PolyChrome Sync Issue

August 28, 2019, 4:48 pm
$
0
0
Author: gizmic
Subject: X570 Steel Legend: PolyChrome Sync Issue
Posted: 28 Aug 2019 at 11:48pm

http://forum.asrock.com/forum_posts.asp?TID=4537&title=rgb-led-issues
↧
↧

AMD Motherboards : Asrock x570m pro4 - 4 ram sticks problem

August 28, 2019, 4:52 pm
$
0
0
Author: Benlehot
Subject: Asrock x570m pro4 - 4 ram sticks problem
Posted: 28 Aug 2019 at 11:52pm

This is strange.

Other people since to be able to run 4 sticks at higher speed

See: http://forum.asrock.com/forum_posts.asp?TID=12312&title=x570m-pro4-1800-fclk-no-boot
Or: https://www.newegg.ca/Product/SingleProductReview?ReviewID=10228695
↧

AMD Motherboards : X570 Steel Legend: PolyChrome Sync Issue

August 28, 2019, 5:01 pm
$
0
0
Author: rtazaki
Subject: X570 Steel Legend: PolyChrome Sync Issue
Posted: 29 Aug 2019 at 12:01am

Originally posted by gizmic gizmic wrote:

http://forum.asrock.com/forum_posts.asp?TID=4537&title=rgb-led-issues


What do you read?

i said.
>2. Firmware may not be updated
↧
Search

AMD Motherboards : Ryzen 3000 series support

August 29, 2019, 2:08 am
$
0
0
Author: bleomycin
Subject: Ryzen 3000 series support
Posted: 29 Aug 2019 at 9:08am

X470 Taichi Ultimate
Bios: 3.40
CPU: 3700x

After update from 3.20 (which works mostly fine), motherboard is unable to save any changes. Every boot of the board has it stall and reset itself to defaults. Reverted back to 3.20 for now. I had this same behavior on 3.30 as well. Hopefully it is fixed at some point. Disabling onboard wifi currently does not work.
↧

AMD Motherboards : Ryzen 3000 series support

August 29, 2019, 3:18 am
$
0
0
Author: gizmic
Subject: Ryzen 3000 series support
Posted: 29 Aug 2019 at 10:18am

wow thats a weird problem but when you say stall is it like restarts and beeps a few times and then loads defaults when it successfully boots
↧
↧

AMD Motherboards : Can't Install Windows Server 2008 on AMD A320M-HDV

August 29, 2019, 3:59 am
$
0
0
Author: Min Min
Subject: Can't Install Windows Server 2008 on AMD A320M-HDV
Posted: 29 Aug 2019 at 10:59am

I can't install Windows Server 2008R2 on A320M-HDV. It shows "the bios in this system is not fully acpi compliant" with BSOD. How should I do?

Thanks.
↧

AMD Motherboards : No post and boot loop with ASRock AB350M PRO4

August 29, 2019, 6:06 am
$
0
0
Author: godispoohbear
Subject: No post and boot loop with ASRock AB350M PRO4
Posted: 29 Aug 2019 at 1:06pm

holy crap! This was my problem. The double click for ram. really gotta push it in on the non-tab side
↧

AMD Motherboards : X570 Steel Legend: PolyChrome Sync Issue

August 29, 2019, 8:11 am
$
0
0
Author: Brians5t7
Subject: X570 Steel Legend: PolyChrome Sync Issue
Posted: 29 Aug 2019 at 3:11pm

Also getting the red/green color swap, and flickering in my LEDs.

After reading thru all 8 pages or the linked post, I haven't found Nothing I have not tried yet. Anyone have any more suggestions? How long do we have for a warranty return?
↧
Viewing all 13906 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>