Quantcast
Channel: ASRock Forums
Viewing all 13906 articles
Browse latest View live
↧

AMD Motherboards : Ryzen 3000 series support

October 29, 2019, 9:43 pm
$
0
0
Author: linas
Subject: Ryzen 3000 series support
Posted: 30 Oct 2019 at 4:43am

Thanks. PC is now POST'ing but the M.2 SSD is not recognised in BIOS or by windows installer
↧
Search

AMD Motherboards : Ryzen 3000 RDRAND microcode bug

October 29, 2019, 10:28 pm
$
0
0
Author: ncc1701z
Subject: Ryzen 3000 RDRAND microcode bug
Posted: 30 Oct 2019 at 5:28am

Just now I read about a microcode bug here:
https://arstechnica.com/gadgets/2019/10/how-a-months-old-amd-microcode-bug-destroyed-my-weekend/

As it turns out, Ryzen 3000 series shipped with a broken random number generator. It gives you a 0xFFFFFFFF for the "random" number, every single time. For some systems (especially Linux) it made them unable to boot. Destiny 2 on Windows also can't run because of it.

Apparently it should've been fixed with a BIOS update, but it seems not to be the case even today. Article explained how to check if your system is affected, but it required Linux.

For anyone willing to do the check and share their results, I am grateful.
I hope ASRock had this problem fixed.
↧
↧

AMD Motherboards : Ryzen 3000 RDRAND microcode bug

October 29, 2019, 11:03 pm
$
0
0
Author: Ray62
Subject: Ryzen 3000 RDRAND microcode bug
Posted: 30 Oct 2019 at 6:03am

These problems are fixed since over two months.
Since "AMD AGESA Combo-AM4 1.0.0.3 ABB" the RDRAND problem is fixed (for Linux systemd and Destiny 2 on Windows, but also for all SW using the RDRAND instruction).
So a bios must contain at least this AGESA version, which should be the case for all consumer/mainstream boards from Asrock supporting Zen2 CPUs.
↧

AMD Motherboards : Help Fatal1ty B450 Gaming-ITX/ac memory problem

October 29, 2019, 11:36 pm
$
0
0
Author: Ray62
Subject: Help Fatal1ty B450 Gaming-ITX/ac memory problem
Posted: 30 Oct 2019 at 6:36am

3000Mhz with a CL14 timing is a good setting for this RAM.
Remember, this is dual ranked RAM with a higher electrical load compared to single ranked and you have a 2600 CPU which is designed for max. 2933 MHz RAM clock.
If you will be able to reach 3200Mhz with increased timings, the result probably ends in a lower performance compared to this CL14 timing at 3000MHz.

BTW:
There is a dependency for tCL (CAS) to GearDown mode.
If GearDown mode is enabled, only even tCL values are valid, so it will be rounded up to the next even value.
↧

AMD Motherboards : B450 gaming itx/ac 3200 XMP not working with LPX

October 30, 2019, 12:09 am
$
0
0
Author: section94
Subject: B450 gaming itx/ac 3200 XMP not working with LPX
Posted: 30 Oct 2019 at 7:09am

Copy paste from the same post I made on toms. In short PLAY WITH SECONDARY TIMINGS TOO:

I finally managed to get it to work at 3200.
I downgraded to bios 1.70 after contacting asrock support and following their instructions as they said it is the best bios for 1st gen Ryzen. They also recommended increasing RAM and SOC voltage but none of those helped.
The problem was actually in the sub-timings that the XMP profile sets, not in the 3200mhz clock speed. The Tras value that it was trying to set was too aggresive (54) and the board was not liking it. Setting it to 57 got me up and stable with all other XMP settings untouched. Primary timings were never an issue and I can boot even with CL 14 (altough I dont trust it for 24/7 stability).
So as a general FYI, if you cant get an XMP profile to work take a look at the timings on your bios as XMP profiles can modify the sub-timings too, not only the primary timings. It might be just a single value that prevents it from working.
Finally happy and stable at 3.9 Ghz @1.375 Volts and 3200mhz CL16!
↧
↧

AMD Motherboards : B450 gaming itx/ac 3200 XMP not working with LPX

October 30, 2019, 12:22 am
$
0
0
Author: section94
Subject: B450 gaming itx/ac 3200 XMP not working with LPX
Posted: 30 Oct 2019 at 7:22am

Correction on above post:
I meant the trc value not tras ??
↧

AMD Motherboards : A320M Pro4 Conflicts with DRAM

October 30, 2019, 8:50 am
$
0
0
Author: ASRock_TSD
Subject: A320M Pro4 Conflicts with DRAM
Posted: 30 Oct 2019 at 3:50pm

Dear jokeUsa,

Greetings, this is ASRock TSD.


For your question, we have some check points for you to verify your system:

1. Please enter BIOS setup and load BIOS default setting via [F9] key.

2. Try to install the memory to A2/B2 slot to observe if the problem could be solved.

3. Reinstall a clean Windows 10 OS to verify if the symptom is caused by OS data.

4. Install another HDD/SSD to verify the storage configurations.


Thanks!

All the best,
ASRock TSD
↧

AMD Motherboards : The sound disappears from my B450M-HDV

October 30, 2019, 9:29 am
$
0
0
Author: Ray62
Subject: The sound disappears from my B450M-HDV
Posted: 30 Oct 2019 at 4:29pm

Maybe you have the audio problem caused by a windows update KB4515384
https://www.windowslatest.com/2019/09/12/windows-10-kb4515384-audio-issues/
↧
Search

AMD Motherboards : The sound disappears from my B450M-HDV

October 30, 2019, 12:20 pm
$
0
0
Author: ASRock_TSD
Subject: The sound disappears from my B450M-HDV
Posted: 30 Oct 2019 at 7:20pm

Dear -BaarLun-,

Greetings, this is ASRock TSD.


Referring to your question about onboard audio ports, kindly verify the suggestions below:

1. Kindly verify both front and rear audio port.
2. Kindly install the Realtek driver from the link below:
http://asrock.pc.cdn.bitgravity.com/Drivers/All/Audio/Realtek_Audio(v8403_FF00).zip
3. Kindly refer to page.25 to clear CMOS:
http://asrock.pc.cdn.bitgravity.com/Manual/B450M-HDV.pdf
4. Kindly clean install the operating system.


Thanks!

All the best,
ASRock TSD
↧
↧

AMD Motherboards : Bench whit ryzen 5 2600X

October 30, 2019, 12:25 pm
$
0
0
Author: xylit
Subject: Bench whit ryzen 5 2600X
Posted: 30 Oct 2019 at 7:25pm

778/5000
hello, I'm back after restoring bios to 1.80 thanks to support.
the problem persists, it doesn't go beyond the 3.9Ghz in the bench
other person on toms italy forum, with b450 gaming 4k but ryzen 3600 finds same problems.
my hardware:
XPG ASX8200PNP nvme
ssd 860evo
b450 gaming 4k
ryzen 5 2600X + artic freezer 33 export edition
geforce 2070 super
2X8 ddr4 corsair vegance CMK16GX4M2B3200C16.
I thought it was due to the bios but this is not the case.
Differences from previous tests where it rose regularly to 4.2Ghz: I replaced ssd sata main with nvme, made a new installation of windows 10 with the latest drivers available.
cpu temperature never above 66 ° C under same now that is limited to 3.9Ghz
Can new amd chipset drivers for b450 cause this?
↧

AMD Motherboards : Bench whit ryzen 5 2600X

October 30, 2019, 12:35 pm
$
0
0
Author: xylit
Subject: Bench whit ryzen 5 2600X
Posted: 30 Oct 2019 at 7:35pm

Originally posted by xylit xylit wrote:

778/5000
hello, I'm back after restoring bios to 1.80 thanks to support.
the problem persists, it doesn't go beyond the 3.9Ghz in the bench
other person on toms italy forum, with b450 gaming 4k but ryzen 3600 finds same problems.
my hardware:
XPG ASX8200PNP nvme
ssd 860evo
b450 gaming 4k
ryzen 5 2600X + artic freezer 33 export edition
geforce 2070 super
2X8 ddr4 corsair vegance CMK16GX4M2B3200C16.
I thought it was due to the bios but this is not the case.
Differences from previous tests where it rose regularly to 4.2Ghz: I replaced ssd sata main with nvme, made a new installation of windows 10 with the latest drivers available.
cpu temperature never above 66 ° C under same now that is limited to 3.9Ghz
Can new amd chipset drivers for b450 cause this?


edit: also the other user has identical nvme... is he the cause?
↧

AMD Motherboards : X570 Taichi 3 NVMe drives - Detection problem.

October 30, 2019, 7:58 pm
$
0
0
Author: Newrockuser
Subject: X570 Taichi 3 NVMe drives - Detection problem.
Posted: 31 Oct 2019 at 2:58am

No new firmware was available, how ever, I fixed it. But instead of working top down I decided to work from the bottom up.

- Reflashed bios with 2.10. problem was still there.
- Reinstalled windows - Problem was no longer there (made retore point)
-Started adding the AMD chipset drivers 1 by 1 doing a restore point after each set added

- AMD SATA/ATAPI drivers installed - Problem resurfaced
- Restored windows to before SATA ATAPI driver install - Fixed.
↧

AMD Motherboards : Ryzen 3000 RDRAND microcode bug

October 30, 2019, 8:25 pm
$
0
0
Author: ncc1701z
Subject: Ryzen 3000 RDRAND microcode bug
Posted: 31 Oct 2019 at 3:25am

You would be right, that should've been the case.
Except the mainboard in the article didn't get the fix even now.
Granted, it's a rather niche board (Asrock Rack X470D4U), but that situation shouldn't happen.

Oh well, maybe it's just a special case and I'm just being paranoid
↧
↧

AMD Motherboards : Ryzen 3000 series support

October 30, 2019, 8:44 pm
$
0
0
Author: wenerikk
Subject: Ryzen 3000 series support
Posted: 31 Oct 2019 at 3:44am

Originally posted by linas linas wrote:

Thanks. PC is now POST'ing but the M.2 SSD is not recognised in BIOS or by windows installer


Are you sure that your mobo is fine? Because problem with recognising of M.2 was solved since issue of 3.40 beta version.

In the beginning I had bios 3.30, it had 2 main issues: POST and recognizing of M.2. Then with 3.40 update solved M.2 problem but even 3.50 didnt solve post bootloops. Only 3.53 (beta) for my mobo which will follow with 3.60 stable is promising one.
↧

AMD Motherboards : X570 and RGB Polychrome 2 problems

October 30, 2019, 10:03 pm
$
0
0
Author: Fala7er
Subject: X570 and RGB Polychrome 2 problems
Posted: 31 Oct 2019 at 5:03am

Ah.. installed the new version shows:

Version: 1.0.60
Firmware: 2.10

The hdd spin up/down still happens tho for the other problem i will test the app for a few days.
↧
Search

AMD Motherboards : X570 Taichi 3 NVMe drives - Detection problem.

October 30, 2019, 10:34 pm
$
0
0
Author: Ray62
Subject: X570 Taichi 3 NVMe drives - Detection problem.
Posted: 31 Oct 2019 at 5:34am

Congratulations!

Wow, AMD SATA/ATAPI drivers!
Thank you, i will keep an eye on that for my machine.

↧

AMD Motherboards : Ryzen 3000 RDRAND microcode bug

October 31, 2019, 4:23 am
$
0
0
Author: shmerl
Subject: Ryzen 3000 RDRAND microcode bug
Posted: 31 Oct 2019 at 11:23am

On Linux you can also explicitly load latest microcode, even if motherboard firmware still ships the old one: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/amd-ucode

↧
↧

AMD Motherboards : Ryzen 3000 series support

October 31, 2019, 7:15 am
$
0
0
Author: Xaltar
Subject: Ryzen 3000 series support
Posted: 31 Oct 2019 at 2:15pm

Originally posted by linas linas wrote:

Thanks. PC is now POST'ing but the M.2 SSD is not recognised in BIOS or by windows installer


Are the M.2 drives you have tested on the board's QVL list?

https://www.asrock.com/MB/AMD/Fatal1ty%20B450%20Gaming-ITXac/index.asp#Storage

Other than the possibility that they are unsupported I can't really think of
anything to suggest. It may be time to send a support ticket to ASRock:

https://event.asrock.com/tsd.asp
↧

AMD Motherboards : Ryzen 3000 series support

October 31, 2019, 9:01 am
$
0
0
Author: gizmic
Subject: Ryzen 3000 series support
Posted: 31 Oct 2019 at 4:01pm

the board supports both sata and pcie interface type m.2 in theory all types should work i'm leaning towards the board has something wrong on the slot itself
↧

AMD Motherboards : Dual Channel A320TM-ITX not working

October 31, 2019, 9:29 am
$
0
0
Author: Nevilum
Subject: Dual Channel A320TM-ITX not working
Posted: 31 Oct 2019 at 4:29pm

Hello.
Motherboard A320TM-ITX
Processor Ryzen 5 3400G
Memory DDR 4 HX429S17IB2K2/16
In this assembly, does the memory only work in single channel? Does this motherboard support dual channel mode and how to enable it?
Thank you!
↧
Viewing all 13906 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>